Define the IES Files
Our next step will be to define the luminaires to be used in our project. In this case we will use two luminaires with permission from Holophane, an Acuity Brands company. Luminaire design is constantly evolving and these files/products may be obsolete. Always check with the manufacturer before using any photometric data in real projects. The IES files have been provided in the AGi32 Street Lighting folder.
- From the Luminaire Toolkit, select the Define button.
- Inside the Define dialog, click on the Browse/Recent button.
- Navigate to the AGi32 Street Lighting\IES Files folder.
- Window across both IES files (there are only two) to select them.
- Click OK.
AGi32 will open the Smart Symbols dialog for each luminaire. For the first luminaire , LEDG_072...
|
|
For the second luminaire, LEDG_084...
|
|
Both luminaire definitions are now ready to use, but before we leave we will set a Light Loss Factor for both luminaires. We can do this in one operation as follows:
|
RESCUE
Open the file: RESCUE-Street-2.AGI